DS1/DS2 series servo press

Product Overview

Flexible, intelligent, and efficient

The servo punch can set and control the speed of the slider at any position, which not only makes difficult stamping processing easier, but also significantly improves the quality and accuracy of stamping products.

Performance characteristics

Advantages of servo presses over traditional presses:

The speed during the machining process can be arbitrarily set and changed, making production usability unparalleled.

Compared with traditional presses, the production efficiency can be significantly improved by increasing the speed through the return stroke.

The stroke height and movement sequence can be programmed, resulting in production flexibility.

The motion sequence can be optimized to improve and extend the quality of components and the lifespan of the mold.

Efficient driving solutions reduce energy consumption.

Compared to traditional presses, the number of mechanical components is smaller and easier to maintain.

Equipped with a handwheel fine adjustment function can significantly shorten the trial mold time.

HMI human-machine interface functions:

The motion curve planning of servo press (crankshaft mode, multi link mode, pressure maintaining mode, single side mode, pendulum mode, silent punching mode, repeated pressing mode, and free programming mode).

The production process status detection, production volume preset, and counting of servo presses.

Style="color: rgb (51, 51, 51); width: 16px; height: 16px;">Real time display of torque curve of the motor, angle of the crankshaft, slider displacement, etc.

The management system of the mold library requires the recipe function of big data.

Black box function: It can record the core data of the main transmission in real-time when the equipment malfunctions, making it easy for maintenance.

Slider operation mode:

The usual crankshaft operating mode.

Any linkage operation mode.

Perform a short stroke repetitive pressurization mode near the bottom dead center.

The mode of low speed blanking processing near the bottom dead center to reduce processing noise.

The pressure maintaining mode where the pressurization stops near the bottom dead center.

Easy to achieve a mode of joint control with the feeding device movement.

Find the appropriate stamping operation mode through trial punching.

Control function for instantaneous energy release during processing.

Technical Parameter

Technical Parameter		unit	DS1-80	DS1-100	DS1-125	DS1-160	DS1-200	DS1-250
Nominal force		kN	800	1000	1250	1600	2000	2500
Rated toque journey		mm	4	4	5	6	6	6
Slide stroke		mm	160	180	180	200	200	220
Number of unloaded trips		min^-1	~50	~45	~35	~35	~30	~30
Maximum Die Set Height		mm	320	330	350	400	450	500
Adjustment amount of mold installation height		mm	80	90	90	100	110	120
Distance from the center of the slider to the body		mm	310	330	350	400	430	450
Column distance		mm	580	670	630	696	910	980
Size of the bottom surface of the slider	about	mm	540	620	620	700	880	900
Size of the bottom surface of the slider	around	mm	460	520	520	580	650	700
Mold handle hole size	diameter	mm	50	70	70	70	70	70
Mold handle hole size	depth	mm	70	80	80	100	100	100
Workbench size	about	mm	950	1060	1100	1175	1390	1500
	around	mm	600	640	680	760	840	880
	Blanking hole	mm	180	180	200	200	250	270
Distance between workbench and ground		mm	845	850	850	900	1000	1000

Technical Parameter		unit	DS2-200	DS2-250	DS2-315	DS2-400	DS2-500	DS2-630
Nominal force		kN	2000	2500	3150	4000	5000	6300
Rated toque journey		mm	6	6	7	8	8	8
Slide stroke		mm	200	200	220	250	280	350
Number of unloaded trips		min^-1	~45	~40	~35	~30	~25	~20
Maximum Die Set Height		mm	600	650	700	700	750	800
Adjustment amount of mold installation height		mm	100	100	120	120	150	150
Column distance		mm	2600	2700	2800	2950	3300	3500
Size of the bottom surface of the slider	about	mm	2200	2300	2400	2500	2800	3000
Size of the bottom surface of the slider	around	mm	800	900	900	900	1000	1100
Workbench size	about	mm	2500	2600	2700	2800	3100	3300
Workbench size	around	mm	900	1000	1000	1000	1100	1200
Distance between workbench and ground		mm	1150	1250	1300	1350	1380	1400

Note: Items with * are optional. (Products can be customized according to user requirements) The content of this sample is subject to change without prior notice.